News archives 1 of the company IVM


December 2013
Commissioning of a filter control in the tobacco industry in Andorra.

December 2013
Reprogramming and commissioning primary in the tobacco industry in Ontario / Canada.

November 2013
In Nuremberg in late November was again the most important exhibition of automation technology "SPS / IPC / DRIVES".
Here we presented the interested visitors our products and news from the company TER.

November 2013
Reprogramming and commissioning of a gear production line in the automotive supply industry in Kosice / Slovakia.

October.-Dec. 2013
Planning, production control cabinet, software development, installation commissioning of a filter / fan control in the tobacco industry in Germany.

September 2013
Conversion of a complete filling line to a new case format in the beverage industry in Bogota / Colombia

September 2013
Service due to problems with the filling line in the beverage industry in Kreuztal / Germany.

August 2013
Installation / assembly, software development and commissioning of equipment, for the integration of a superheated steam dryer in a lamina- / stem line in the tobacco industry in Brandenburg / Germany.

August 2013
Planning, production control cabinets, software development, Installation and commissioning of a dosing weigh belt in the tobacco industry in Brandenburg / Germany.
May-August 2013
Conversion of a complete filling line to a new case format. The filler (blow molding block), labeling, case conveyors, packaging machines (Cardboard & Packaging film) container transport and palletizers had to be changed. Beverage Industry in Riyadh / Saudi Arabia.

July/August 2013
Commissioning of a complete primary (stem line) including superheated steam dryer in the tobacco industry in New York / USA.


July/August 2013
Programming and commissioning of a gearbox production line in the automotive industry in Kosice / Slovakia.

June-July 2013
Planning and production of a sub-distribution for the supply of some production machines in the tobacco industry in Germany.

June-July 2013
Planning and production control box for a fan in the tobacco industry in Germany.

July 2013
Performance increase of a filler line and pasteurization in the beverage industry in Riyadh / Saudi Arabia.

June 2013
In Berlin in middle of June was the fair Showtech.
We were able to present our products of the company TER to very interested visitors. Here we presented the new radio remote controls and the new pendant station series Mike.


june 2013
Commissioning of a filler line (blow molding machine block) and labeling in the beverage industry in Khamis Muschayt / Saudi Arabia.

june 2013
Service application by reason of a interruption of a filler line in the beverage industry in Kharj / Saudi Arabia.

May/june 2013
Installation and commissioning of a filler line in the beverage industry in Riyadh / Saudi Arabia.

May/june 2013
Installation / assembly of a complete lamina line in the tobacco industry in New York / USA.

Mai-June 2013
Planning, production control cabinet and software development for a filter cabinet, as well for 4 dosing weigh belt controller in the tobacco industry in New York / USA.

February-May 2013
Planning, production control cabinet and software development for a lamina cutting and dryer line in the tobacco industry in New York / USA.

May 2013
Commissioning of two freezer control cabinets in the food industry in Salzburg / Austria.

April 2013
Commissioning of a freezer control cabinet in the food industry in Poland.

February-April 2013
Planning, production control cabinet and software development for a lamina infeed line in the tobacco industry in New York / USA.

April 2013
Installation / assembly of a superheated steam dryer in the tobacco industry in New York / USA.

April 2013
Installation / assembly of two freezer control cabinets in the food industry in Salzburg / Austria.

April 2013
Commissioning of software modifications for a lamina line in the tobacco industry in Daggmersellen / Switzerland.

April 2013
Hannover Industrial Fair 2013, we have successfully introduced our products from the company TER. The new radio remote controls and the new pendant station series Mike were presented for the first time


April 2013
Planning, production control cabinet and software development for a infeed line in the tobacco industry in New York / USA.


April 2013
Commissioning (new location image) of a palletizing plant in a sweet cider in Kiesby / Germany.

April 2013
Software development and commissioning of a freezer in a fish factory in Norway.

march 2013
Recommissioning of a reactor for the chemical industry in Hamburg / Germany.

march 2013
Hardware delivery and Software development for a paternoster storage system in Hungary.

march 2013
Planning, production control cabinet and Software development for two freezer control cabinets in the food industry in Austria.

march 2013
Software development for a superheated steam dryer and a vibro cooler for a tobacco production line in China.

> February/March 2013
Installation and commissioning of a filler/blow molding block for hot filling and aseptic, CIP-system and hygiene center in the beverage industry in Aksu / China.

February 2013
Reprogramming and commissioning of an old S5 software with CP527 for the addback control in the tobacco industry in Pecs / Hungary.

January 2013
Reprogramming of a S7 software for the control of a burley lini with a burley toaster in the tobacco industry in China.

January 2013
Creation of a S7 Software for the control of a superheated steam dryer in the tobacco industry in New York / USA.

December/January 2012/13
Reprogramming and commissioning of a gearbox assembly line in the automotive supply industry in Kosice / Slovakia.

December 2012
Planning of switchgears of two containership in Germany.

November/Dec. 2012
Overhaul and maintenance of a complete line for the bottling of softdrinks in the beverage industry in Sudan.

November/Dec. 2012
Planning, switch board construction, software creation, montage and commissioning of a flavourline in the tobacco industry in Ontario/Canada

November 2012
One of the most important exhibitions for the automation branch “SPS/IPC/DRIVES” took place in Nuremberg. We presented our products at the exhibition stand of the company TER

November 2012
Acquisition of the chief agency for North Germany of the Czech company TER Ceska s.r.o.

November 2012
Reprogramming and commissioning in the motor production line of the automobilindustry in Eindhoven/Holland.

october/Nov.2012
Reconstruction and commissioning of the top label technique of a productline in the beverage industry in Holland.

October/Nov.2012
Commissioning of the fill and transport technics in the beverage industry in Holland.

October/Nov. 2012
creation of a S7 software for the control of a Hot airflow dryer in the tobacco industry in Germany

October/Nov. 2012
creation of a S7 software for th control of a drier linein the tobacco industry in Bolivia

August/Dec. 2012
planning, switchboard construction software creation and montage of a freezer control in the food production in Poland

September/Oct. 2012
Reprogramming, commissioning and product companion of a few controls in a production line in the automotive supply industry in Bremen/Germany.

September/Oct. 2012
Reprogramming of the S7 SPS control of a Burleyline in the tobacco industry in China.

September/Oct. 2012
Reprogramming, commissioning and product companion of a few controls in a gear production line in the automotive supply industry in Kosice/Slovakia.

September/Oct. 2012
Montage and commissioning of the case transport technics, unpack and pack and top labeler in the beverage industry in Mexico.

August/Sept. 2012
Montage and commissioning of the case transport technics, unpack and pack and top labeler in the beverage industry in Mexico.

March - July 2012
Montage and commissioning ot the transport technics, fill in and blow machine in the beverage industry in Bulgaria.

Juni 2012
Reprogramming, commissioning and product companion of a task- and a cutter drier line in the tobacco industry in Bucharest/Romania.

June 2012
commissioning and product companion in the chaining control of a motor checkline in the automobile industry in Untertürkheim/Germany.

May/June 2012
Creation of a S7 software for the control of a Hot airflow dryer in the tobacco industry in Serbia.

April/May 2012
planning, switch board construction, Software creation, Montage (exchange on an old existing switch board) and commissioning of a flavourline in the tobacco industry in Ontario/Canada.

February/April 2012
Reprogramming, commissioning and product companion of a few controls in the gear production line in the automotive supply industry in Kosice/Slovakia.

March/April 2012
Creation of a visualizationwith iFix for a Burleyline in the tobacco industry in China.

March 2012
Commissioning and product companion of a few controls in the gear production line in the automobile industry in Kassel/Germany.

January/Febr. 2012
reconstruction and commissioning blow machine and a filling line in the beverage industry in Chile.

Dec. 2011/Jan. 2012
Montage and commissioning of an empty packaging inspection in the beverage industry in Germany.

October-Dec. 2011
planning, switch board construction, Software creation, Montage (exchange on an old existing switch board) and commissioning of a freezer control in the ice cream production in Sweden.

October-Dec. 2011
planning, switch board construction, Software creation, Montage (exchange on an old existing switch board) and commissioning of a silo- and feeder control in the tobacco industry in Ontario/Canada.

October-Dec. 2011
reprogramming, commissioning and product companion of a few controls in a gear production line in the automotive supply industry in Kosice/Slovakia.

November 2011
Montage and commissioning of a filling line in the beverage industry in Argentinia.

September/Oct. 2011
Montage and commissioning of transport technics, packing and unpacking, labelling and a filling- and washing line in the beverage industry in Chile.

September/Okt. 2011
reprogramming and commissioning of a S7 SPS control and the InTouch visualization of a plant to produce high expanding tobacco in Le Havre/France.

July/August 2011
reconstruction, reprogramming and commissioning of a Slicer in the chemical industry in Hamburg/Germany.

July/August 2011
reprogramming, commssioning and production companion of a few controls in the gear production line in the automotive supply industry in Kosice/Slovakia.

July/August 2011
Commissioning of the palleting, of a pallet transport line and of the packaging in the beverage industry in Germany.

July 2011
Relocation of our company in Canada from Toronto to Brantford in own premises.
Company:
74 Avondale Street 1, Brantford N3S 4M1, Ontario

April 2010-July 2011
replacement of a Modicon SPS control and VisiPro visualization against new cutter SPS controls and VisiWin Net visualizations. Incl. the SPS and visualization software creation in a malt factory in Hamburg/Germany.

April/May 2011
Reprogramming, commissioning and production companion of a few controls in a gear production line in the automotive supply line in Kosice/Slovakia.

April 2011
planning, switch board construction montage and commissioning of a rinser control in the tobacco industry in Germany.

March 2011
Bonding of a remote servicing in a freezer control in the food industry in Holland.

März 2011
commissioning of a filling and labelling line in the beverage industry in Belgium.

February/March 2011
planning, switch board construction, Software creation, Montage and commissioning of 5 pieces feeder controls in the tobacco industry in Germany.

February/March 2011
Commissioning of a slicer in the tobacco industry in Pecs/Hungary.

February/March 2011
planning, switch board construction, Software creation, Montage and commissioning of the control of a sliced tobacco stock in the tobacco industry in Germany.

January 2011
Commissioning of a Hot airflow dryer and an energy recovery system in the tobacco industry in Switzerland.

November/Dec. 2010
planning, switch board construction, Software creation, Montage and commissioning of the control of a freezer in the food industry in Holland.

September 2010
Mr. Tarik Badri our new employee joined our construction-/ Software Team. Mr. Badri is primarily employed for the creation of visualization- and S7 programs.

June/July 2010
commissioning of a „Flavour application“ and a „Bin filling station“ in the tobacco industry in Bucharest/Romania.

June/July 2010
dislocation of a S7 programme on a Beckhoff control for components in the tobacco industry in Germany.

May/June 2010
planning, switch board construction, Software creation, Montage and commissioning for the control of a cigarette machine feeder of the tobacco industry in Ontario/Canada.

May/June 2010
A several days lasting schooling for the installed Beckhoff controls at a customer in the tobacco industry in Germany.

April/May 2010
Reprogramming of a „Flavour application“ and a „Bin filling station“ in the tobacco industry in Bucharest/Romania.

March 2010
Reprogramming and commissioning of a silo control in the tobacco industry in Bucharest/Romania.

March/April 2010
planning, switch board construction, Software creation, Montage and commissioning for the expansion of a blade line of a „Roll your own“ production and rib task in the tobacco industry in Germany.

January/February 2010
Reprogramming and commissioning of different plant bitsof a silo control in the tobacco industry in Pecs/Hungary.

August/May 2010
planning, switch board construction, Software creation, Montage and commissioning for 5 pieces feeder lines with the Beckhoff control in the tobacco industry in Germany.