-Terminal T3000
The Terminal T3000 is a simple terminal with a three digit seven – segment – display (digit height 25mm) and a key board with 20 keys altogether ( 0-9, enter, C, END, MV, MC, I, M, P, arrow up and arrow down. The selection, respectively the request of the key board is ensued by 5 digital in- and 8 digital outputs (all of them 24 DC).Supply voltage 24V DC, dimensions (WxHxD) 190 x 240 x 50mm in the steel sheet casing.

-Terminal T3001
The Terminal T3001 has a background lighted LCD – display with 4 lines and 20 characters each (character height 5mm). Moreover, there are 24 keys altogether, 16 keys are beside the display arranged and 8 keys are under the display arranged. 4 of the keys, which are found under the display, can be optionally lead out as potentially free contacts (setting above the jumper). The selection ensues optionally by the RS232, RS485 or the TTY – point of intersection, whereby the RS485 or the TTY mode can be switched up to 15 terminals in a row. The front panel is conducted as a full frontal foil with a protection type IP65. All keys are inscribable by removable strips, moreover there is a slide – in strip available for e.g. a logotype, the company logo or a supplies labeling. Supply voltage 24V DC, dimensions (WxHxD) 249 x 128 x 35mm in the steel sheet casing.

-Controller S3001
controller S3001 has a background lighted LCD – display with 4 lines and 20 characters each (character height 9mm) and altoether 31 keys. The front panel is conducted as a full frontal foil with a protection type IP65. The S3001 has 24 digital inputs and 16 digital outputs with 24v DC/250mA, schort curcuit protected, as well as a serial RS232/RS485 and a RS485 point of intersection. The control can be programmed by a Windows Software in Basic.

-Output module L3001
The output module L3001 has altogether 56 digital outputs 24V DC, 250mA, short curcuit protected, as well as a serial RS232 and a RS 485 point of intersection. The control can be programmed by a Windows software in Basic.This module is designated as an expansion to the controller S3001, nevertheless it can be applied as a single device.

-Decoder Dek8/32
The decoder Dek8/32 has been developed to save digital – output – assembly at the SPS. With the decoder Dek8/32 you can actuate e.g. 255 lamps or rellays with only 8 digital outputs. Up to 32 outputs per decoder move 24V DC each 220mA short curcuit protected with a common ground point.