IVM Ingo von Minden Ingenieurbüro und Industrievertretungen
Saseler Bogen 10, 22393 Hamburg   Tel.: 040/60012970, Fax.: 040/60012971   E-mail: info@ivm-minden.de 
News/Projects 
Home 
                                   News/projects of the company IVM


Oktober - ??? 2017
Installation (replacment of an old existing cabinet, incl. installation) and commissioning of a washing machine for the automotive supply industry in Bursa/Turkey.

Oktober 2017
Acquisition of the general agency for northern germany, of the company Auer Signalgeräte GmbH. Auer Signal is one of the world’s leading manufacturers of signalling equipment and is present in more then 70 countries. Made in Austria: Auer Signal products stand out from the crowd thanks to their innovative in-depth solutions and ingenious engineering.



Sept./Oktober 2017
Software changes and commissioning in 4 feeding lines in the tobacco industry in Pecs/Hungary.

September 2017
Software development of a control software for a bale pusher in the tobacco industry in Batangas/Philippines.

Juli - September 2017
Commissioning of two filling lines for the beverage industry in Vinadio/Italy.

Juli - August 2017
Planning and production of 3 control boxes for cut-off systemy in tube manufacture in Henstedt-Ulzburg/Germany.

Juli 2017
Installation in the production of a chemical plant in Norderstedt/Germany.

Juni - Juli 2017
Planning and production of a control box for a wax container in Henstedt-Ulzburg/Germany.

Juni - Juli 2017
Planning and production of 3 switchboxes for granulators in Henstedt-Ulzburg/Germany.

Juni - Juli 2017
Dismantling of an old and assembly/installation of a new machine component in a bottling line for the beverage industry in Rinteln/Germany.

Juni - ??? 2017
Planning, production control cabinets, software development, assembly (replacment of an old existing cabinet) and commissioning of a complete lamina infeed line in the tobacco industry in Ontario/Canada.

Juni - September 2017
Planning, production control cabinet, Software development, assembly and commissioning of a control system for a Filter in the tobacco industry in New York/USA.

Juni - August 2017
Software development for a dryer/flavourline with TIA Portal V14 in the tobacco industry in Morschansk/Russia.

Juni 2017
Software integration and commissioning of an OPC communication connection for the operational data acquisition of a blow molding machine in the consumer goods industry in Lamozza and Ferentino/Italy.

Juni 2017
Installation in the production of a plastic processing plant in Norderstedt/Germany.

Mai - August 2017
Planning, production control cabinets, software development, assembly/installation and commissioning of a freezer control in the food industry in in Irapuato/Mexiko.

Mai - Juni 2017
Commissioning of a blowing machine and a labeler in a filling line for the beverage industry in Pathum Thani/Thailand.

Mai - Juni 2017
Planning and productionof 3 control boxes for pelletizer in Henstedt-Ulzburg/Germany.

Mai 2017
Repair and commissioning in a bottling line for the beverage industry in Fredericia/Denmark.

April - Mai 2017
Planning and production of a control box for a cut-off system in tube manufacture in Henstedt-Ulzburg/Deutschland.

April 2017
Installation in the production of a plastic processing plant in Norderstedt/Germany.

März - September 2017
Planning, production control cabinets, software development, assembly (replacment of an old existing cabinet) and commissioning of a complete stem infeed line in the tobacco industry in Ontario/Canada.

März - April 2017
Planing and production of a control box for a sidestream filter unit in Henstedt-Ulzburg/Germany.

März - April 2017
Commissioning of a complete can filling line for the beverage industry in Chachoengsao/Thailand.

März - May 2017
Commissioning of a complete primary for the tobacco industry in Batangas/Philippines.

März 2017
Integration of a labeler into a bottling line of a brewery in Berlin/Germany.

March 2017
Integration of a labeler and a label tester into a bottling line of a brewery in Berlin/Germany.

May 2016 - February 2017
Installation and commissioning of two complete bottling lines for the beverage industry in Mymensingh/Bangladesh.

January - June 2017
Planning, production control cabinets, software development, assembly (replacment of an old existing controller) and commissioning of a press control in the plastic industry in Norderstedt/Germany.

January/February 2017
Software development for a complete orient infeed line in the tobacco industry in Batangas/Philippines.

January - July 2017
Production of 50 switch boxes for machines in the construction industry in Henstedt-Ulzburg/Germany.

March 2016 - January 2017
Planning, production control cabinets, software development, assembly (replacment of an old existing cabinet) and commissioning of a complete stem line, consisting of cutting and dryer line in the tobacco industry in Ontario/Canada.

December 2016
Installation and commissioning of a washing machine for the automotive supply industry in Bursa/Turkey.

December 2016
Acquisition of the general agency for northern germany, for the southern german company Wicom1 GmbH. As a result, we have expanded our sales spectrum with very interesting and high-quality products from the field of display technology / large-scale displays. Standard products are customer-specific "packaged"! Using standard components, WICOM1 GmbH produces custom-made products according to customer requirements.



November/December 2016
Commissioning of software changes in a casing line for the tobacco industry in Dagmersellen/Switzerland.

November/December 2016
Planing and production of a control box for a mixing control in Henstedt-Ulzburg/Germany.

October 2016
Installation and commissioning of a washing machine for the automotive supply industry in Rottenburg/Germany.

September/October 2016
Software development for a Vibro cooler with a dedusting filter for the tobacco industry in Berlin/Germany.

June - September 2016
Production of 50 switch boxes for machines in the construction industry in Henstedt-Ulzburg/Germany.

June 2016
Trouble shooting at several freezers in the fish industry in Sassnitz/Germany.

June 2016
Change/expansion, commissioning of the software for a puffer box in the tobacco industry in Königslutter/Germany.

Juni 2016
Our workshop team will be strengthened by our new colleague Mrs Josephine Reith-Hauel. Ms. Reith-Hauel will primarily take care of our switchgear construction.

Mai 2016
In Hannover took place in late May, the world's leading fair for intralogistics "Cemat".
Here we presented the technical visitors our products and news from the company TER. Particularly interesting were the new introduced products of the ATEX series.


Mai 2016
Our sales team will be strengthened by our new employee Mr. Georg Ruhmann. Mr. Ruhmann will focus exclusively on the distribution of our products and services. For this, he brings the necessary experience from the sales.

Mai 2016
Software integration and commisioning of a OPC communication connection for production data acquisition of a blowing machine in the consumer goods industry in Milan / Italy.

April 2016
Conversion to a new control system and commissioning of a blow molding machine in the beverage industry in Shanghai/China.

March/April 2016
Conversion of a capper in the beverage industry in Lamia/Greece.

March 2016
Trouble shooting at a filler in the beverage industry in Marne/Germany.

February-May 2016
Planning, production control cabinets, software development, assembly/installation and commissioning of two freezer controls in the food industry in Ermelo/Netherlands.

February/March 2016
Commissioning of a filler and a labeling machine in the beverage industry in Metzeral/France.

February 2016
Conversion to a new control system and commissioning of a blow molding machine in the beverage industry in Heerhugowaard/Netherlands.

January/February 2016
Renovation/conversion to a new control system and re-commissioning of a champagne filler in the beverage industry in Polch/Germany.

January/February 2016
Conversion to a new control system and commissioning of a blow molding machine in the beverage industry in Novosibirsk/Russia.

January 2016
Planning, production control cabinet and software development for a high-pressure test bench for hydraulic hoses in Hamburg/Germany.

January 2016
Trouble shooting, and installation of remote maintenance components in a fish factory in Melbu/Norway.

December 2015
Overhaul of system components in the beverage industry in Marrakech/Morocco.

December 2015
Inspection of the wet part in the beverage industry in Oujda/Morocco.

December 2015
Retrofitting of an interface to a CHP in the beverage industry in Eilenburg/Germany.

November 2015
Modernizing of a valve node in a filler in the beverage industry in Kloster Lehnin/Germany.

November/December 2015
Uninstall and reinstalling in a new hall, from production machines in a rubber/plastics engineering company in Norderstedt/Germany.

November/December 2015
Planning, hardware supply and software development (replacing an old existing plc) of a round feeder in the tobacco industry in Ontario/Canada.

September 2015
Optimization of a stem cutter and a hot steam dryer in the tobacco industry in Kloster Lehnin/Germany.

November 2015
Retrofitting of a label dispenser for the labelling of milk in the beverage industry in Aalter/Belgium.

August-November 2015
Commissioning of a aseptic filling line for milk in Saint Pere en Retz/France.

August 2015
Planning, installation and commissioning for the integration of a metall detector in a lamina line in the tobacco industry in New York/USA.

January-August 2015
Planning, production control cabinet, software development, assembly (replacement of an old existing cabinet) and commissioning of a complete lamina line, consisting of a cutting- and dryer line in the tobacco industry in Ontario / Canada.

Juli 2015
Installation of the transport and inspection technology in a filler line (partial modernization) in the beverage industry in Sebeta / Ethiopia.

April-July 2015
Modification/upgrading of the program of an engine production line in the automotive industry in Salzgitter /Germany.

April/Mai 2015
Commissioning of a filler line with transport technology in the beverage industry in Debre Berhan / Ethiopia.

April 2015
Setting up a bottling line to a new bottle design and optimization of the plant in the beverage industry in Klagenfurt / Austria.

April 2015
In Hannover Industrial Fair 2015, we have successfully introduced our products from the company TER. So here was the first time were we presents the new series of our pendant control Charlie.


March 2015
Planning, Production control box and software development for a tipper control in the medical industry in Neumünster / Germany.

March 2015
Reprogramming of the timestamp management of a freezer in the food industry in Hilter/Germany.

March 2015
As a leading global trade fair, Anuga FoodTec important impetus to the international food and beverage industry.
As the world's only fair she covers all aspects of food production.
Anuga FoodTec take place at end of March in Cologne. At the booth of our partner company Ilinox we presented the first time the very interesting products to the trade visitors in the field of stainless steel enclosures.


March 2015
Conversion of a filling line to a new bottle-/case format and optimization of the plant in the beverage industry in Stara Zagora / Bulgaria.

March 2015
Mr. Abel Moreno-Ortega our new employee joined our construction-/Software Team. Mr. Moreno-Ortega is primarily employed for the creation of visualization- and S7 programs.

January/Febr. 2015
Setup and installation of a filler and the transport technology in the beverage industry in Addis Ababa / Ethiopia.

December 2014
Rebuilding and recommissioning of a freezer control in the food industry in Hilter / Germany.

June-December 2014
Installation and commissioning of 2 complete filling line (complete construction of a new brewery) in the beverage industry in Addis Ababa / Ethiopia.

November 2014
In Nuremberg in late November was again the most important exhibition of automation technology "SPS / IPC / DRIVES".
Here we presented the interested visitors our products and news from the company TER.

November 2014
PLC upgrade and networking of the entire primary, as well as setting up a remote maintenance for all the cabinets in a tobacco factory in Ontario / Canada.

Sept.-Novemb. 2014
Manufacture, installation / assambling and commissioning of a control panel with B & R controller and Acopos modules for vibrating tables for production of machine beds in Zerbst / Germany.

Oct./November 2014
Commissioning of the software for an extension of the stem line in the tobacco industry in New York / USA.

October 2014
Production of two operating panels with B & R controller and Acopos modules for vibrating tables.

Sept./October 2014
Software development for a dryer line with Sirox and a KLD-dryer for a tobacco production line in Longyan / China.

September 2014
Acquisition of the general agency for northern germany, of the italian company Cariboni. This allowed us to expand our product range to another very interesting product insulated conductor rails.

September 2014
In Hamburg "Your gateway to the world of wind energy," the premiere of the exhibition "Wind Energy" take place.
We were there and presented the technical visitors our products and news from the company TER.


July/August 2014
Commissioning of the software for a silo room with a total of 7 final blend silos and 6 feeders, including the conveyor system in the tobacco industry in Ontario / Canada.

March-July 2014
Planning, production control cabinets, software development, assembly / installation and commissioning of a freezer control in the food industry in Poland.

June/July 2014
Software development for a superheated steam dryer and a vibro cooler for a tobacco production line in Sumatra / Indonesia.

June/July 2014
Planning, material supply, modification of the control cabinet on site and software development PLC and panel for an extension of the stem line in the tobacco industry in New York / USA.

June/July 2014
Software development for a silo room with a total of 7 final blend silos and 6 feeders, including the conveyor system in th tobacco industry in Ontario / Kanada.

May-July 2014
Planning, production control cabinets, software development, installation and commissioning of two filter / fan controls in the tobacco industry in Germany.

May 2014
In Hanover took place in the middle of May, the world's leading trade fair for intralogistics "Cemat".
Here we were back there and presented the technical visitors our products and news from the company TER.



May 2014
Commissioning of a filler and a module-labeling machine in the beverage industry in Yokohama / Japan.

April/May 2014
Installation and commissioning of a freezer control in the food industry in Hilter / Germany.

April/May 2014
Commissioning of a tank system with automatic dosing and mixing function in an existing control of a lamina line in the tobacco industry in Wervik / Belgium.

April 2014
Troubleshooting and software changes to a filler in the beverage industry in Stralsund / Germany.

April 2014
Installation of a filler and transport technology in the beverage industry in Rosenheim / Germany.

April 2014
Acquisition of the general agency for northern germany, for the italian company Ilinox SRL. This allowed us to expand our product range with very interesting products in the field of stainless steel enclosures. We also have the opportunity to go through very flexibly to customer requests and to realize even Custom made from 1 piece.

April 2014
Acquisition of the general agency for northern germany, of the italian company TER SRL Tecno Elettrica Ravasi. The very successful cooperation with the Czech representation TER Ceska sro was finished. Due to a change of the distribution structure, from April the factory in Italy directly take care for all sales representations in germany.

February-April 2014
Installation / assembling and commissioning of a complete stem line in the tobacco industry in New York / USA.

February/March 2014
Planning, production control cabinet and software development for a freezer control in the food industry in Hilter / Germany.

January/Febr. 2014
Software development for a slicer in a lamina infeed line in New York / USA.

January/Febr. 2014
Planning, delivery of materials and software development for a foil addback line in the tobacco industry in New York / USA.

January/Febr. 2014
Integration of a tank system with automatic dosing and mixing function in an existing control of a lamina line. Development of a new visualization for a Simatic Panel in the tobacco industry in Wervik / Belgium.

January/Febr. 2014
Planning, production control cabinet and software development for control of a quad feeder for feeding 4 cigarette maker in New York / USA.

January 2014
Performance increase of a bottling line in the beverage industry in Bedele / Ethiopia.

January 2014
Troubleshooting in a visualization of a reactor for the chemical industry in Hamburg.

January 2014
Integration of a new dosing weigh belt in the old lamina line. Commissioning of the dosing weigh belt. Reprogramming and commissioning of the old S5 software with CP527 for the control of the lamina line in the tobacco industry in Pecs / Hungary.

Sept.-January 2014
Planning, production control cabinet and software development for a complete stem line in the tobacco industry in New York / USA.

Dec./January 2014
Christmas support for a new bottling line at Coca Cola in Addis Ababa / Ethiopia.

References Home News Contacts Jobs Services About us Engineering office About us Terms of trade News Contacts Imprint Privacy statement References Terms of trade Contacts Imprint Privacy statement
Ingo von Minden
IVM Ingo von Minden 07.2019
Industry representation
News/Projects
News