IVM Ingo von Minden Ingenieurbüro und Industrievertretungen
Saseler Bogen 10, 22393 Hamburg   Tel.: 040/60012970, Fax.: 040/60012971   E-mail: info@ivm-minden.de 
Home 
                          News archives 2 of the company IVM


December 2009
Commissioning of a ventilator/rinser control in the tobacco industry in Portugal.

November/Dec. 2009
planning, switch board construction, Software creation, Montage and commissioning for a conveying system to fill pulp tanks in the tobacco industry in Russia.

November 2009
Creation of a visualization with WinCC for a blade line in the tobacco industry in China.

November 2009
Reprogramming and commissioning of a silo control in the tobacco industry in Pecs/Hungary.

November 2009
Our team grows as our new employees Mr. Torben Hoinkis and Mr. Ralf Wilkens joined the team. Mr. Hoinkis is primarily employed for the local accomplishment of hardware projects from our customers . Mr. Wilkens will supervise our shop and our assembly department.

October/Nov. 2009
planning, switch board creation, software creation and commissioning of a tobacco humidification of the tobacco industry in Russia.

September 2009
planning, switch board creation, software creation for a pilot facility to humidificate tobacco in the tobacco industry in Germany.

August 2009
planning, switch board construction, Software creation, Montage and commissioning for a conveying system with a balance control in the tobacco industry in Germany.

August 2009
Creation of a visualization with a WinCC for a part of a drier line for the tobacco industry in China.

August 2009
Creation of a visualization with a WinCC for an other conditioner barrel in the tobacco industry in China.

July 2009
Creation of a visualization with a WinCC for a conditioner barrel in the tobacco industry in China.

July 2009
Creation of a visualization with a WinCC for a slicer/conditioner line in the tobacco industry in China.

July/August 2009
planning, switch board construction, Software creation, Montage and commissioning for a dust collection in the tobacco industry in Ontario/Canada.

May/June 2009
bonding of a Hot airflow dryer at the blade line of a tobacco preparation in Ontario/Canada.

June 2009
Reprogramming and commisioning of a silo control in the tobacco industry in St. Petersburg/Russia.

June 2009
Our team grows because our new employee Mr. Jan Köhlitz. Mr. Köhlitz is employed for the accomplishment of hardware and software projects.

April/May 2009
planning, switch board construction, Software creation, Montage and commissioning for the dust collection in the tobacco industry in Germany.

March/April 2009
planning, switch board construction, Software creation, Montage and commissioning of a switch board expansions of a silo- and feeder line in the tobacco industry in Germany.

March/April 2009
switch board construction for a checking station in the automobile industry in Hamburg/Germany.

March 2009
recommissioning of an automatic car parkway in Berlin/Germany.

März 2009
Different reconstructions and commissionings at a slicer and a conditioner barrel in the tobacco industry at Tenerife.

March 2009
Our montage- and commissioning team grows as our new employee Mr. Sven Ehlers. Mr. Ehlers will primarily keep in local contact with our customers.

February 2009
planning, switch board construction and software creation for a silo filling in the tobacco industry in Germany.

January 2009
Reprogramming and commissioning of a silo control in the tobacco industry in St. Petersburg/Russia.

November/Dec. 2008
Disassembly and rebuilding and commisioning of a feeder control in the tobacco industry in Germany.

November 2008
Delivery and montage of a roller track to fill up completed tobacco in plastic boxes in the tobaco industry in Germany.

November 2008
different rebuildings and commissioning at a Slicer and a conditioner barrel in the tobacco industry at Tenerife.

October 2008
Inspection and recommssioning of an old drier in the tobacco industry in Denmark.

September 2008
commissioning of more plant parts of a „green field“ for tobacco preparation equipped with ca. 32 switch boards and with Beckhoff controls in Taiwan.

September 2008
Equipment of an old drier with new sensor technology, servo organs and a closed – loop transfer function in the tobacco industry in Germany.

August 2008
planning, switch board construction, Software creation, Montage and commissioning for a dust collection in the tobacco industry in Germany.

July 2008
Reconstruction and commissioning of a slicer and a conditioner barrel in the tobacco industry at Tenrife.

July 2008
Commissioning of a complete „green field“ tobacco preparation with ca. 32 switch boards equipped with Beckhoff controls in Taiwan.

December-May 2008
Montage, software creation and commissioning of a reactor bowl in the chemical industry in Hamburg/Germany.

January 2008
Montage and commissioning of a stowage box in the tobacco industry in Germany.

December 2007
Conversation/Reprogramming and commissioning of a cutter of a S5 control to a S7 control, as well as programming the new panel in Germany.

November-Dec. 2007
Delivery and software creation for the automatic labelling printer at a box fill up in the tobacco industry in germany.

September-Oct. 2007
planning, switch board construction and software creation for a stowage box in the tobacco industry in Germany.

July/August 2007
Exchange of an old OP30 panels by a new Siemens Panel, incl. the software-/picture-creation a cutter-/ drier line in the tobacco industry in Ontario/Canada.

June/July 2007
planning, switch board construction, Software creation, Montage and commissioning for switch board expansions of the task line and the cutter-/ drier line in the tobacco industry in Germany.

June 2007
Commissioning of a drier control in the tobacco industry in Volgograd/Russia.

May-August 2007
Reconstruction of a task line and a drier-/cutter line in the tobacco industry from S5 to S7, incl.software creation in Germany.

April 2007
Commissioning of a control with a S7 – 300 for a powder coating plant in Austria.

March 2007
Delivery and commissioning of a control with a S7 – 300 for a storage system at a window producer in Nantes/France.

December/February 2007
reconstruction of a task line in the tobacco industry from S5 to S7, incl the software creation in Ontario/Canada.

October/November 06
planning, switch board construction, Software creation, Montage and commissioning for the silo filling and emptying int the tobacco industry in Germany.

September/October 06
planning, switch board construction and software creation for a drier in the tobacco industry in Volgograd/Russia.

August/September 06
Commissioning of a dedusting plant in a tobacco factory in Berlin/Germany.

August/September 06
planning, switch board construction, Software creation, Montage and commissioning for a dedusting plant in a sugar factory in Holland.

July/August 2006
Montage of an dedusting plant in a tobacco factory in North Carolina.

August 2006
Our team grows as our new employee Mr. Torsten Weber joins us. Mr. Weber is primarily employed for the accomplishment of hardware and software projects.

June 2006
Opening of a company in Toronto Ontario/Kanada. We socialise from here and keep our customer contacts in Canada and North America.
Company:
480 University Avenue, Suite 1500, Toronto, Ontario M5G 1V2

March/August 2006
Installation of a complete tobacco preparation in Germany. The plant consist of a task line and a cutter/drier line.

October 2005
Socket of the circuit diagram and of the function as well as the creation of a program flow chart (Modicon – control) for the production machine in the pharmaceutical industry.

September 2005
Commissioning of a few S3001 controls at the biggest book mail – order business Borders in the USA.

July 2005
planning, switch board construction, Software creation, Montage and commissioning for two lines in the tobacco industry in Königsluther/Germany.

February/March 2005
Commissioning of a production line and a silo control for the tobacco industry in Surabaya/Indonesia.

December 2004
Connection of a storage system to the robot control of the automatic feeder of the storage.

September 2004
Installation and commissioning of a leak test plant for the automobile industry in Stuttgart/Germany.

August 2004
Commissioning of a feeder and a slicer reconstruction for the tobacco industry in Alicante/Spain.

July/August 2004
Installation and commissioning of a rib line for the tobacco industry in Nottingham/England.

June 2004
Reconstruction/reprogramming (S5, OP37) silo area at the tobacco industry in Pecs/Hungary.

May 2004
Participation at the exhibition „Industria“ in Budapest.

March/April 2004
Commissioning of different plant areas in the tobacco industry in Ontario/Canada.br>
February 2004
Beginning of the cooperation with the company MiDiTec, Dr. Pottharst, Displays – Technologies, microelectronics and identsystems consulting.

September 2003
participation at the exhibition „SPS/IPC/DRIVES“ in Nuremberg.

September 2003
termination of a project for the tobacco industry (feedback control software) in Shifang/China.

August 2003
Completion of the new version V3.5 of our compact control S3001.

August 2003
Completion of a silo control for the malthouse in Hamburg. Complete transaction of the automation (planning, switch board construction, installation, control software, visualization and commissioning, as well as schooling of the operating staff.

August 2003
completion of a lift control with a S7-200 control and the operating station S3001 for the substantial product administration of a storage lift.

August 2003
Termination of a very substantial project in Batangas/Philippines. Project begin was in March 2002.

June 2003
Completion of a project for the tobacco industry in Trier/Germany.

June 2003
Delivery of a switch board with a B&R control at the concrete factory.

June 2003
Termination of a project for the tobacco industry in Wuhu/China.

May 2003
Expansion of the cooperation with the Austrian company RESI.

März 2003
completion of the new version V3.3 of our compact control S3001.

January 2003
Beginning of the cooperation with the Czech company „SK mont s.r.o.“. This cooperation enables us to accomplish cheap specialists and montages.

January 2003
Beginning of the cooperation with the Hungarian company „Elektro – Automatika Kft“.

December 2002
Termination of 3 projects with software creation and commissioning in Turkey.

References Home News Contacts Jobs Services About us Engineering office About us Terms of trade News Contacts Imprint Privacy statement References Terms of trade Contacts Imprint Privacy statement
Ingo von Minden
IVM Ingo von Minden 07.2019
News archives 2
Industry representation
News archives 2